Before You Ride

Free Performance Updates

IMPORTANT: Performance updates may be available for your new e-scooter. To get the best possible performance out of your brand-new e-scooter, just download the Pure app, connect it to your scooter, and go to the Scooter Update tab. Check the app regularly for new updates.


Tyre Pressure and Battery Range

Use the tyre valve extender and pump included in the box to inflate your tyres to the required pressure of 36psi and make sure you fully charge your e-scooter by waiting for the light on your charger block to go from red to green. PLEASE NOTE: This is because your battery might have reduced range, since it’s so brand new and may never have been used. It’s totally normal and shouldn’t be an issue after your scooter’s been through a full charge and discharge cycle.

Key Safety Checks:

Before Every Ride
Every 1 month, or every 300km, additionally

Unboxing Your New E-Scooter

Meet the Pure Advance Flex. With its forward-facing footpads and ultracompact folding design, it’s the e-scooter that fits in your hallway and thinks outside the box.But what’s inside the box? Well, let’s find out. It’s time to watch your future unfold before your eyes.

Step By Step

1. Raise the stem

Remove the protective packaging but do not lift the scooter out of the cardboard frame just yet. Lift the stem until it clips upright into the frame.

2. Secure the latch

Lift the latch mechanism until it clips securely into the stem. Warning! Do not ride the scooter if the latch is loose.

3. Bring down the kickstand

Carefully bring the scooter from the box and bringdown the central kickstand to stabilise the scooter.

4. Raise the steerer height

Pull the quick release lever (at the top of the stem) away from the stem. Once fully pulled back, raise the steerer until it is fully extended. Finally push the quick release lever back into the stem to lock it in place. Warning! Do not ride the scooter if the quick release lever is loose.

5. Unfold the handlebars

Take the right handlebar. Pinch and slide the 2 toggles (one on the front and one on the back) atthe same time to unfold the handlebar. Raise the handlebar into the riding position. Repeat the steps for the left handlebar.

6. Secure the handlebars

Once each handlebar is in the riding position, check they are securely in place. Do not ride the scooter if the handlebar is loose.

7. Unfold the scooter

First – Hold the handlebars and twist them to the left to unclip the front wheel from the backwheel.

Next – With the back wheel secure on the ground, hold the handlebars and rotate the front half of the scooter so that the frame of the front and back of the scooter join together.

Finally – The frame will clip together once thescooter is joined together in this position.

8. Lock together the frame

Before trying to lock the frame together with the central latch (see next image), you must pull the latch back to prepare it for locking.

Once the latch has been pulled back you can now push the latch forward until it clips securely to the frame of the scooter.

Warning! Do not ride the scooter if there is any movement in the hinge or the latch is loose.

9. Charge the battery

You can charge your e-scooter by plugging the charging cable into the charging port. Once fully charged the charger light will change from red to green.

10. Unfold the footpads

Lower the footpads into the riding position.

11. Check your tyre pressure

IMPORTANT:Always use the tyre valve extender provided every time you attach the pump to your tyres, or you risk breaking the valve. Use the tyre valve extender and pump included in the box to inflate your tyres to the required pressure of 36psi.

12. Bring up the central kickstand

Once you are ready to ride, simply raise the central kickstand, and scoot off!

Quick Tips To Get Going

1. The Controls

Use your right thumb to operate the throttle and your left hand for the brake and indicators.

2. Select Mode

Switch on and double press the multifunction button to select your riding mode.

3. Push To Start

Simply push off the ground, then press the throttle to activate the motor.

Safety Information

Riding instructions
Riding Safely